Results 1 to 1 of 1

Thread: Super 8 Movie Prtojector Repaired

  1. #1
    Join Date
    Mar 2009
    Thanked 18 Times in 13 Posts
    Feedback Score

    Default Super 8 Movie Prtojector Repaired

    Nothing whatever to do with 4/3 but I thought some of you might be interested. Went to run some my old super 8 movies through the projector with a view of having them digitised. The rewind spool failed to work and bits of yellow plastic fell out of the projector. Opened it up and found that a yellow plastic worm-gear had disintegrated. The projector is a Eumig S934. Eumig went belly up 35 years ago. I did a bit of research and found these guys in Holland that run the video servicing company Van Eck Video Services. Apparently plastic worm-gear failure is common in Eumigs, so much so that these enterprising young lads are 3D printing this part. I bought the part, got it in a few weeks, installed it and I was back in business, so to speak. This is the youtube video of how they did the 3D printing . This is how to replace the worm-gear .
    E-M1, 12-40mm PRO, 60mm macro, MMF-3
    E-450, 50-200mm SWD, 25mm f2.8, EC-14

  2. The Following User Says Thank You to BobT For This Useful Post:

    ken610 (07-02-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts